Throttle stop/burnout limiter. Clips on throttle cable for easy removal before run!

$45.00

Cast aluminum quick release burndown breathers, all polished with hardware and gaskets included.

$189.00

1-1/4 burn down breathers comes with hardware a must for oil control in supercharged applications.

$189.00

Ready to bolt on your big block Chevy engine. Completely assembled with all valves springs, retainers and locks.

$8860.00

I have a set we are rotating out of our racing inventory $7,100.00. Serviced and ready to run. Bare Castings $5850.00

Redesigned for street rod use complete cylinder head conversion packages starting at

$10760.00

For every application, custom sizes and lengths never a problem.

Competitive pricing

Fast Turnaround

3.500-4.250 stroke. New Chevy or Chrysler pattern on crank flange.

$3350.00

The ultimate street crate engine! 540 cubic inches. Oil pan to manifold, can be run as a single 4 bbl motor or supercharged! Merlin 3 block, cast iron 10.200 deck 4.500 bore. Eagle forged crankshaft 4.250 stroke Eagle H beam connecting rods Arias forged pistons for the Hemi Chevy with pins rings Isky hydraulic roller camshaft Pro comp electronic ignition Milodon timing set Milodon oil pan for Hemi Chevy Milodon water pump Melling high volume oil pump Clevite Premium engine bearings

$18900.00 - and up

1 pair of cast aluminum Hemi Chevy cylinder heads completely assembled with premium Stainless valves, seals, springs, retainers & locks, 2 pair of Rocker arm assemblies with billet rocker stands, heat treated rocker shafts, heat treated intake rocker arms with needle bearing tips included with tool steel adjusters. 1 set Manton push rods with tool steel tips 1 pair cast alum. valve covers & breathers 1 set spark plug tubes and seals 1 pair of steel header flanges 1 cast alum intake manifold (blower or carb.) 1 cast aluminum valley cover gaskets for heads, valley cover, hardware for cylinder heads valve cover and breathers Cylinder head kits assembly and dyno tested

$18900.00

739 hp. @ 6500 rpm with a 1-1 street blower and 3 pounds of boost!

Set up ready to run. Included is a tunnel ram intake manifold, cast aluminum birdcatcher adapter, new polished birdcatcher injector, a 80a fuel pump, and your choice of a belt drive or camshaft driven fuel pump. Each unit is setup & calibrated for your application at no additional charge.

$2185.00

BB blower belt guard (new rules)

$175.00

with studs and stands $249.00

2000 rule requirement includes cage screws and panel.

$135.00

2 premium burst panels with sfi tags.

$55.00

Competition style and all polished. Comes with 3" Billet idler pulley, tee nut and mounting hardware.

$289.00

Comes with all the hardware and certification

$325.00

Used with new certification (without hardware) $275.00

This is our popular burst panel adapter kit it includes cage, panel and adapter plate – no hardware. This will bolt on all CRAGAR manifolds where a pop off valve once was or can be adapted to other manifolds.

$135.00

These new Long Billet Spin-on Oil Filters features dual O-ring groves and comes with 2 universal mounting inserts to fit most 3-3/4in diameter X 5-1/4in long Chevrolet, Ford and Chrysler applications with 13/16-16 or 3/4-16 threads. Available with a 35, 45 or 75* micron element. Black Anodized finish and meets or exceeds all OEM manufactures spec�s. Flows 30* G.P.M. Metric Filters are also available for models with 18 mm, 20 mm, or 22 mm x 1.5 threads.

209-571B* Billet Spin on Filter, 75 Micron 3-3/4 X 5-3/4 long, 2 Universal Inserts

208-570 75 Micron replacement element for 209-571

205-140-1 Viton O ring kit for above filters

$259.00

BB Chevy block mount water blocks

$88.00

For all your engine applications, many in stock - quick 4-day delivery for custom applications. From

$89.00 - /set

Set BB Chevy rod, drilled and narrowed. Available in +.001, -.001. standard, .010, .020

$57.00

Main bearings std., available in +.001, -.001, standard, .010, .020 sets

$68.00

Call for pricing for your application. There are many ring/bore sizes available as well as materials and styles.

$189.00 - and up

All billet construction

$729.00

Get the original and the best!

Same as billet, but starts as a casting

$528.00

Why spend more on a cheap offshore copy? Get the original and the best!

Ackerly & Childs bearings from......

$149.00 - /set

With hub and degree ring interchanges with RCD support

$885.00

Billet aluminum with fully degreed hub, complete ready to run, includes all hardware

$1039.00

1/2'' and 3/4" fine rolled thread

$55.00

Sold without degree ring

$396.00

Full 360 degreed timing ring. This is the industry standard and on the shelf for

$229.00

Also available with magnets for crank trigger ignitions. $268.00

$139.00

Aluminum Block Chevy bore spacing 4.840, Chrysler, Olds, Chevrolet bell housing pattern. .250 raised cam, 9.800 10.200 or 11.700 deck height option, cross bolted mains. They will accommodate bores up to 4.625 & strokes up to 5.300

$5800.00 - w/studs

Call Now! In Stock!

$13.00 - ea.

with sheetmetal core

$42.00

new 3.9 amps ready to run with case, transformer, generator, base and wiring instructions

$949.00

REMANUFACTURED UNITS FROM - $475.00

6in Magneto Offset Drive. Fits in standard distributor location. For use with larger 14-71 blower. It will accept MSD or Mallory magneto

$675.00

4in Magneto Offset Drive same as above but more compact

$650.00

All CNC machined and ready for Leahy pickup (sold seperately)

$78.00

For a Chevrolet with gear drive. Complete new in the box this works on a Keith black or Donovan Gear Drive

$589.00

This billet aluminum piece moves the mag to the front of the motor also drives the fuel pump. Very nice with all special fasteners. This part will place the magneto in the forward facing location, fits All MSD mags as well as Mallory mags.

$945.00

Used Mallory Magneto Base for tall deck or short deck magneto. Features bronze gear and tach drive.

$95.00

Simply attaches to your fuel pump extension with a quick release clamp and it fits in front of the blower belt (Can be modified to fit behind blower belt).

RCD Front distributor drive – this will accept a full length magneto base/distributor base, it is fully clockable and will mount a fuel pump with a quick release flange, 3-1/2 thick

$1080.00

Mike Kuhl river rat water pump For your boat, race car, or street rod. It is stackable with an Enderle or Hilborn fuel pump and can replace a fuel pump extension. Comes with -10 inlet & -8 outlet fittings. Polished finish.

$525.00 - /ea.

The best billet aluminum ready to rock!

$1189.00

for earlier style big block Chevrolets to drive a mechanical fuel pump. It will also accept a fuel pump extension. This cover has the water block offs cast into it, which can easily be cut off for different applications.

$145.00

Cam drive hub to drive fuel pump from camshaft $65.00

7 position precision gear drive. All billet construction and it has a fuel pump provision. Very nice quality

$1089.00

Complete ready to install. I have one used cast version for $425.00 perfect!

Bridge to mount Enderle/Hilborn fuel pump to Jesel belt drive on front of block

$189.00

Adjustable Air Bleed, designed to regulate exact RPM settings on blown engines where specific RPM's are critical for starting line launch and clutch management.

$85.00

This is a oil pump drive for a big block Chevrolet with the magneto driven off the front. It features a bronze gear for roller camshaft and is in good shape

$110.00

RCD Front Tri Drive to mount magneto oil pump and fuel pump on front of motor a very sanitary piece that is well thought out

$1398.00

Set up for std deck, all pulleys, belt, snout, etc. Street gas. POLISHED. New!!!

$4200.00 - and up

Machined for burst panel and port nozzles, will accept water. 9.800 deck manifold

$1165.00

Ask about our valley cover option!

Machined for burst panel and port nozzles, will accept water. 10.200 deck manifold

$1195.00

Ask about our valley cover option!

Standard 9.800 deck motor, this has burst panel machined and port nozzles. Will accept up to 14-71 blower

$689.00

Burst panel machined and installed for tall deck $210.00 extra. Always in stock, used units also available.

10.200 tall deck motor, this has burst panel machined and port nozzles. Will accept up to 14-71 blower

$748.00

Burst panel machined and installed for tall deck $210.00 extra. Always in stock, used units also available.

The Blower Shop blower manifold with thermostat housing, and gaskets. Ready to bolt on

$680.00

Polishing available $150.00 extra

Blower Shop 10.200 Tall deck blower manifold machined for burst panel and port nozzles (Shown with out panel installed)

$720.00

Standard 9.800 deck manifold $469.00 less panel kit burst panel kit. 2 panels and cage with all hardware $135.00

Royal ram blower manifold for Big Block Chevy, has provision for water, replaceable top plate, will accept 6-71 blower to 14-71 blower and machined for burst panel. Panel extra! Ask about optional valley cover option.

$1425.00

4.250 to 4.500 and .40 to .80

$95.00 - /pr

These work bitch'in!

$44.00 - /pr.

for street or marine applications with same water soft copper sealing. The sealant is pre applied and a built in cylinder o-ring

$139.00 - /pr

$18.00

$60.00

Big Block Chevy MK IV windage tray, Dragster Pan

$359.00

Pickup $49.00

Will clear all valve train components, roller rockers and stud girdles

$159.00 - /pr.

w/burndown breathers installed

$335.00

100% American made! Fully CNC machined 7075 material,7068 is availible any pin size any reasonable length, ARP 2000 bolts, optional L-19 bolts, Direct replacement for Brooks B-2 rods, Cryogenic metal processing availible +$125.00, best value on the market!

$975.00 - /set

2-week turnaround time.

For sportsman type rods

$695.00 - and up!

Pro billet and titanium rods available by request.

Venolia forged connecting rods any reasonable length fast turn around on custom orders

$975.00

$96.00

For the do-it-yourselfer. 2-1/4 tube size better fit makes header fabrication a snap

$65.00

We have lots of zoomies in stock. Blower restraint tabs, hi-temp coated and computer bungs are all available options. New and used starting at

$425.00

Available coating Black silver or satin black $219.00